Using Countdown Timer - Suunto Core User Manual

To use the stopwatch:
1. In the
TIME
2. Start, stop and restart the stopwatch with [Start Stop].
3. Keep [+] pressed to reset the stopwatch.
Possible real life situation: Timing the 100m dash
Your friend is training for a running competition, and needs to know how long it
takes him to run the 100 m dash. You start the stopwatch the instant he breaks
from the blocks. You stop the stopwatch the instant he crosses the finish line. The
result: 11.3 seconds. Not bad!

3.3 Using countdown timer

In you can set the countdown timer to count down from a preset
COUNTDOWN
time to zero. It sounds an alarm when zero is reached. The default is 5 minutes.
To change the default countdown time:
1. In , select
MENU
2. Select
COUNTDOWN
3. Set the timer minutes and seconds (maximum 59 minutes and 59
seconds).
4. Accept with [Mode].
To start counting down:
1. Switch to the
2. Select the countdown timer view.
3. Start, stop and restart with [Start Stop].
4. Keep [+] pressed to reset the timer.
mode, select the stopwatch view.
.
TIME-DATE
.
mode.
TIME
en
13