Countdown Timer; Displays - Suunto AMBIT3 SPORT 2.5 User Manual

Suunto Ambit3 Sport
1.
273
˚
NW
(3.)
214
˚
SW
NOTE: While using the compass in an exercise mode, the [Back Lap] button only locks
and clears the bearing. Exit the compass view to make a lap with [Back Lap] .

3.7. Countdown timer

You can use the countdown timer to count down from a preset time to zero. The timer makes
a short sound every second during the last 10 seconds and sounds an alarm when zero is
reached.
You can show/hide the countdown timer from the start menu under DISPLAYS » Countdown.
Toggle with [Next] .
To set the countdown time:
1. Press [Next] to until you reach the countdown timer display.
2. Press [View] to adjust the countdown time.
3. Set the hours and minutes with [Start Stop] and [Light Lock] . Accept with [Next] .
4. Press [Start Stop] to start the countdown.
2.
Countdown
0:05'00
Adjust
TIP: You can pause/continue the countdown by pressing [Start Stop] .

3.8. Displays

Your Suunto Ambit3 Sport comes with several different features, such as compass (see 3.6.
Compass) and stopwatch (see 3.29. Stopwatch), that are handled as displays that can be
viewed by pressing [Next] . Some of them are permanent, and others you can show or hide as
you like.
To show/hide displays:
14
2.
273
˚
NW
4.
273˚
NW
3.
Set
minutes
00:05
3.
273
˚
NW
4.
Countdown
0:04'59
Started