Using The Metronome - Tascam CD-BT1mkII Owner's Manual

Using the metronome

The CD-BT1MKII has a built-in met-
ronome.
To use the metronome, press and hold
the STOP key to open the Metronome
menu.
Choosing the metronome tempo
1. Press either the PREV
key to select .
MTRO
2. When the menu is first opened,
the metronome sound is off. The
metronome will begin generating
the sound of beats at the previ-
ously set tempo when you press
either the UP key or the
key to set the tempo. Press once
to change by one beat per min-
ute; press and hold either the
or DOWN key to fast forward or
backward through the tempos.
You can set the value between 40
and 220 BPM (beats per minute)
and you will hear the sound of
22
— TASCAM CD-BT1MKII
metronome beats as soon as you
set the value.
Choosing the beats
1. Press either the
key to select
2. Select the rhythm (2 through 6 or
OFF) by pressing either the
or
DOWN
a rhythm you will notice that the
first beat is a higher pitch and vol-
ume than the other beats. In the
or NEXT
OFF setting, all beats are the same
pitch and volume.
NOTE
The metronome functions only when a CD is
not being played back. If you start playing a
CD while using the metronome, the metro-
nome function stops automatically.
DOWN
UP
PREV or NEXT
.
BEAT
UP
key. When you choose