General Information - Holland XA-2081-DA Troubleshooting And Rebuilding Procedures

ITEM PART NO. QTY. PART NAME
1 XA-2081-D1 1 Fifth wheel top plate - 2˝ kingpin
1A XA-2081-03 1 Fifth wheel top plate - 3 1 ⁄ ˝ kingpin
2
2 XB-5 1 Cotter pin 1/4˝ x 2˝
3 XA-1016-C 1 Lock pin
4 XB-T-60 1 Cotter pin 1/4˝ x 2 1 ⁄ ˝
2
5 XA-FW-108-D 1 Lock pin
6 XA-FW-104-D 1 Lock set for 2˝ kingpin
6A XA-FW-104-03 1 Lock set for 3 1 ⁄ ˝ kingpin
2
7 XA-FW-128 1 Spring
8 XB-16 1 Cotter pin 1/8˝ x 1˝
9 XA-FW-138 1 Release handle
10 XA-FW-137-2 1 Secondary lock arm
11 XB-1028-2 1 Spring
12 XB-2083 1 Hex head cap screw 1/2˝-20x1
13 XB-T-49 1 Plain washer
14 XB-T-69-A 1 Hex lock nut 1/2˝-20
* Not included in Rebuild Kits
2
ITEM PART NO. QTY. PART NAME
15 XA-1005-FDS 1 Release lever
16 XA-1117-13 1 Release handle
17 XA-1104 1 Plunger
18 XB-1007 1 Compression spring (red)
19 XB-04473 1 Jam nut 1˝-14
20 XB-2001 1 Socket head cap screw
21 XB-HNH-58-C 1 Lock nut 5/8˝-11
22 XD-3123-1 1 Adjusting wedge
23 XB-403 1 Compression spring
24 XB-02949 1 Bushing
25 XB-0769 2 Lube fitting (90°)
*26 TF-0110 1 Kingpin gage
*27 TF-TLN-1500 1 3 1 ⁄ ˝ kingpin lock tester
2
3 ⁄ ˝ *28 TF-TLN-5001 1 2˝ kingpin lock tester
4
29 XA-05768 1 Adjusting block

GENERAL INFORMATION

1. All fifth wheel maintenance, adjustment and
rebuilding must be performed by a qualified person
using proper tools and safe procedures. For more
information, refer to HOLLAND publication
FW-TE-14C, "Fifth Wheel Maintenance Procedures."
2. Do not modify or add to the product.
3. Use only genuine HOLLAND parts.
4. Wear safety goggles during installation, removal
and rebuilding.
5. Never strike any part of the item with a steel
hammer.
6. Do not weld on this product without written
permission from the factory.
7. Observe standard precautions when lifting.
8. Refer to HOLLAND Publication FW 130 for
description and instructions for Holland TF-TLN-5001
and TF-TLN-1500 Kingpin Lock Testers.
9. Do not deviate from these instructions. Any changes
or deviations will void all warranties, expressed or
implied, unless written consent is first obtained from
the factory.
10. Check to see that all parts included in the kit are
enclosed in the box.
WARNING
This equipment must not be used or
maintained in a careless manner.
These products are covered by HOLLAND'S Commercial
Products Warranty. HOLLAND reserves the right,
without giving prior notice, to change specifications and
dimensions as designs are altered or improved.
7