Table of Contents
Advertisement
Step 3:
Power up your nomad
™
•
Plug the power adapter into the nomad.
•
Plug the other end of the power adapter into an electrical outlet.
Note:
The green light confirms a proper connection.
Green Power Light
nomad
12
Plug Pronged End of Cord
into Electrical Outlet
Step 4:
Verify that all three lights are blue on the nomad
If all connections in Steps 1, 2 & 3 have been made correctly, all 3 lights on the front of the nomad
will be blue.
Note:
The status light on the nomad will display an Amber color and start blinking if new firmware is
available. The update will happen automatically and the light will return to blue when finished.
Please allow up to 10 minutes for the process to complete.
•
Status light will be
blue
Indicates that the nomad system
has properly powered up
•
Network light will be
blue
Indicates that the nomad is
connected to the Internet
•
Activity light will be
blue
Indicates that the nomad is
connected to your HD DVR
If any of the lights displays a different color than blue, recheck all connections made or consult
the "Troubleshooting" section in the manual.
™
Status
Activity
Network
13
Advertisement
Table of Contents
