Connecting Your Nomad - DirecTV nomand Manual

Connecting your nomad

Step 1:
Confirm that your HD DVR is connected to the Internet
• Press the right arrow on your remote control.
- If you see the pop-up message below, your receiver is NOT connected to the Internet.
Visit directv.com/getconnected for more information on how to connect your HD DVR
to the Internet.
No network connection detected.
Please check your connection and
try again. (9)
- If you do not see the above message, your HD DVR is connected, so proceed to Step 2.
10
™
More Info
Cancel
Step 2:
Connect your nomad to your wireless router
™
• Plug one end of the Ethernet cable into the back of the nomad.
• Plug the other end of the Ethernet cable into your wireless router.
Wireless
Router
Ethernet Cable
nomad
11