Honda WT20X Owner's Manual page 12

3. Check the air cleaner element.
Remove the wing nut and air cleaner cover.
Check the air cleaner elements to be sure they are clean and in good
condition. Clean or replace the elements if necessary (p. 17).
WTSOX Type
WTBOX Type
'I??@
ELEMENTS
m
WT40X Type only)
CAUTION: Never run the engine without the air cleaner. Rapid engine
wear will result from contaminants, such as dust and dirt, being drawn
through the carburetor, into the engine.
4. Check the priming water.
The pump chamber should be completely filled before operating.
CAUTION: Never attempt to operate the pump without priming water
or the pump will overheat. Extended dry operation will destroy the pump
seal. If the unit has been operated dry, stop the engine immediately and
allow the pump to cool before adding priming water.
PRIMING WATER
-J
8