Dell ST2420L User Manual page 25

Back
Press the button to go back to or exit the main menu.
Display Settings
Wide Mode
Adjusts the image ratio as 4:3 or full screen.
NOTE: Wide Mode adjustment is not required at maximum preset resolution 1920 x 1080.
Horizontal Position
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Position
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
Sharpness
This feature can make the image look sharper or softer. Use
Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting 'Display Settings'.
Use the and buttons to adjust for best image quality.
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
Dynamic Contrast
Allows you to increase the level of contrast to provide sharper and more detailed image quality.
Resets the display settings to the factory default settings.
Reset Display Setting
Back
Press the button to go back to or exit the main menu.
Audio Settings
Line Out Source
Select the source of the audio
Power Save Audio Turns the Audio Power on or off during power save mode.
Reset Audio Settings
Resets the audio settings to the original factory settings.
Back
Push to go back to or exit the main menu.
Other Settings
or to adjust the sharpness from '0' to '100' .