Setting Up The Car Kit - Kinivo BTC450 User Manual

3. Connect via Bluetooth with phone to receive phone calls and use voice
commands
4. Supports Bluetooth profiles: HFP, HSP, A2DP and AVRCP
5. Charge your device while listening to music via USB port

Setting up the Car Kit

1. Clean the back of the receiver unit and the position in your car where you
want to install the receiver.
2. Peel one side of the adhesive
disc and place on back of the
receiver unit. Peel other side
of adhesive disc and place the
receiver in ideal position in
the car.
3. Plug the car kit's 3.5mm cable
into the AUX input audio jack
on the car stereo. Adjust your
car stereo's settings to AUX
input.
4. Plug the car power adapter
into the car.
Kinivo BTC450 Bluetooth Car Kit
5