Package Contents ............4 Features ..............5 Setting up the Car Kit ..........5 Operation ..............6 1. Turning BTC480 On and Off ........6 2. Adjust Volume ..............7 3. Bluetooth Pairing to One (or First) Device .....7 4. Bluetooth Pairing to Second Device (Multipoint) ...............8...
Do not expose the BTC480 to extremely high or low temperatures. Do not attempt to open or modify the BTC480 in any way. Always dispose of the packaging and unit in accordance with the local regulations and in a responsible manner.
Car Kit Overview Multi Function Button LED Indicator Next Track Button Microphone Previous Track Button Aux Cable Car Charger Magnetic Mounting Disc Dual port Package Contents BTC480 Bluetooth Car Kit User Manual Dual Port Car Charger Kinivo BTC480 Bluetooth Car Kit...
Clean the back of the receiver unit and the place on your car where you want to install the receiver. The position should be that the BTC480 cables do not obstruct the driver’s operation of raise safety concerns. Kinivo BTC480 Bluetooth Car Kit...
Operation 1. Turning BTC480 On and Off The BTC480 car kit will automatically power on when the car is switched on and in most vehicles will power off when the vehicle is switched off. NOTE: In some vehicles, power is supplied to the 12V...
In such cases, the BTC480 will continue to consume minimal power. Users may unplug the cigarette lighter plug manually to avoid any power drain at all. 2. Adjust Volume In order to adjust the volume please use your phone/audio player and/or the car stereo volume controls.
For Android smartphones and tablets Navigate to Settings > Bluetooth (On), then select Scan for devices. Select the Kinivo BTC480 to pair the car kit. For all other devices Please follow your devices’ instructions on how to perform Bluetooth pairing.
Kinivo BTC480. Note: The device which was paired second will act as primary device. All functions like music streaming, call answering, re-dialing, voice command would be done from the second paired device.
6. LED Indication Status LED Indicator Powered off Powered on Blinking blue Pairing mode Alternating blinking blue and red Incoming call Blinking blue Active call Blinking blue every 7 seconds Standby mode Slow blinking blue Kinivo BTC480 Bluetooth Car Kit...
1. Unable to pair to device / Device no longer connects to BTC480 Ensure that the BTC480 car kit is in pairing mode by pressing and holding the multifunction button for 5 seconds (alternating blinking red and blue LED). Now open the...
Bluetooth configuration on the device you are trying to pair and scan for Bluetooth devices. You should see the BTC480 - proceed to pair and connect the car kit. Please refer to the Operation section for Bluetooth Pairing. 2. No audio when playing music or when...
Frequently Asked Questions 1. What is the BTC480 car kit compatible with? In general, the BTC480 car kit will work with devices that support the A2DP (Advanced Audio Distribution Profile), HFP (Hands-free Profile), and AVRCP (Audio/Video Remote Control Profile) Bluetooth profiles. A list of common devices that support these Bluetooth profiles: Apple devices –...
Page 14
BTC480 is powered on (for the first 30 seconds). The BTC480 has a Multipoint feature that automatically connects to 2 devices via Bluetooth. This feature will search roughly within 30 sec for the 2nd device if a 2nd device has been paired/connected on this unit.
In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge. If replacement is required and if Kinivo then no Kinivo BTC480 Bluetooth Car Kit...
Page 16
Kinivo reserves the right to substitute the product with a replacement product of like quality and size, suitable for the intended use. This warranty is limited to repair or replacement of the mentioned product only, is non-transferable and does not extend to any product damaged by misuse, natural disasters or any other circumstances beyond Kinivo’s control.
Page 17
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Kinivo BTC480 Bluetooth Car Kit...
Need help?
Do you have a question about the BTC480 and is the answer not in the manual?
Questions and answers