Spin Trouble - LG WM2688H*M Service Manual

BL WH BL BK
YL
YL
RD
BK
RD
YL
BL
BL
WH
WH
RD
SB
SB
WH SB WH
(1)
(2)
BL WH BL BK
YL
YL
RD
BK
RD
YL
BL
BL
WH
WH
RD
SB
SB
WH SB WH

SPIN TROUBLE

Check during spin if the frequency of the water
level is 248 or more.
Press the START/PAUSE button 2 times in QC
Test mode, is the drum spinning at low speed?
Is it disconnected, or disassembled?
[Red: 3pin (1), NA: 4pin (2)]
Check the motor connector, Is the resistance of
the terminal the same as the figure?
MOTOR TERMINAL
Resistance of terminal:
①-②/②-③/③-① About 5 Ω 15 Ω
Replace the MAIN PWB ASSEMBLY
Does the spring of Latch Hook actuate?
Is there clicking sound once or twice when the
START/PAUSE button is pressed to start the cycle?
Is DOOR SWITCH ASSEMBLY broken?
③ ② ①
28
Check the SENSOR SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the SENSOR
SWITCH ASSEMBLY or the
HOSE, replace the SENSOR
SWITCH ASSEMBLY or the
HOSE.
Normal
Correct the connection.
Replace the STATOR
ASSEMBLY
Replace Door Assembly.
Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Red 3 pin, Yellow 4 pin and
white 3 pin connector (1)).
Replace the DOOR
SWITCH ASSEMBLY.