Chapter 7: Troubleshooting Guide - First Alert FCD2N User Manual

M06_1039_003.E Page 16 Wednesday, July 12, 2000 9:40 AM

CHAPTER 7: Troubleshooting Guide

Problem...
Green light is OFF. Unit will
not alarm when you press the
Test/Silence button.
Unit "chirps" about twice a
minute. Green and Yellow
lights are ON. Red light
FLASHES.
CO Alarm goes back into
alarm 4 minutes after you
press the Test/Silence
button.
CO Alarm alarms frequently
even though no high levels of
CO are revealed in an
investigation.
If you have any questions that cannot be answered by reading this manual, call our Consumer Affairs
Department at 1-800-323-9005.
16
This means... You should...
Unit may not be Gently push unit all the way into outlet.
plugged all the Make sure it is not plugged into an outlet
way in, or is not controlled by a switch.
receiving power.
Unit malfunction. Units under warranty should be returned to
Unit needs to be manufacturer for replacement. See Chapter 8
replaced. "Limited Warranty" for details.
CO levels are Refer to Chapter 3 "If Your CO Alarm Sounds" for
still potentially details on how to respond to an alarm. If anyone
dangerous. is feeling ill, EVACUATE your home immediately.
The CO Alarm may Relocate your alarm. If frequent alarms continue,
be improperly have home rechecked for potential CO
located. Refer to problems. You may be experiencing an
"Where to Install intermittent CO problem.
Your CO Alarm."