Basic Commands; Arm/Lock; Disarm/Unlock; Aux - Directed Electronics SmartStart 5000-series Owner's Manual

Security and remote start system
Hide thumbs Also See for SmartStart 5000-series:
Table of Contents

Advertisement

Basic Commands

Arm/Lock

Press
and release
The alarm arms, doors lock (if connected), and the siren/horn sounds
and parking lights flash once. If Valet mode* is On, the doors lock. Exit
Valet mode to arm/lock the alarm normally.
To Arm/lock and Panic
Press
hold
and
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the
siren/horn and flashes the parking lights.

Disarm/Unlock

Press
and release
The alarm disarms, doors unlock (if connected), and the siren/horn
sounds and parking lights flash twice. Turns panic off if on. If Valet
mode* is On, the doors unlock.

AUX

Press
and release
Perform before the Arm/lock or Disarm/unlock command to use the
remote control in Silent Mode™.
Note:
The Warn away response to lighter impacts is bypassed if the
system is armed using silent mode. this ensures that no chirps are emit-
ted by the siren in an area you want chirp -free but the system is fully
capable of triggering.
4
© 2010 Directed Electronics. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartStart 5000-series and is the answer not in the manual?

This manual is also suitable for:

Smartstart 5000 series

Table of Contents