Sequence Of Cutting Operation - Hobart AIRFORCE 700I User Manual

5-5. Sequence Of Cutting Operation

EXAMPLE Of Cutting Operation
Place tip near work.
.
Keep tip 1/16 in. from
work for max cutting
speed and tip life.
Adjust speed so
sparks go thru metal
and out bottom of cut.
OM-244 013 Page 22
.
A complete Parts List is available at www.MillerWelds.com
Slide trigger lock back.
Press trigger. Pilot arc starts.
Pause briefly at
end of cut before
releasing trigger.
!
The pilot arc starts immediately
when trigger is pressed.
After cutting arc
starts, slowly
move torch
across metal.
Torch air cooling (postflow)
continues after releasing trigger.
.
Postflow must finish before
trigger will restart pilot arc.
804 848-A