Buffalo Nfiniti WLI-UC-GNM User Manual page 22

Chapter 3 Connect to a Wireless Network
4
Use a computer with a wired Ethernet connection to log in to the access point. The screen to
enter the PIN code will be displayed.
Note: If the access point you are trying to connect is a Buff alo AirStation, click Wireless Confi g > WPS from the
home page confi guration interface. The screen to enter the PIN code will be displayed.
5
Your connection is complete when the message "Security setup and connection have been
completed" is displayed.
WLI-UC-GNM User Manual
This screen will be displayed.
On the confi guration screen of
the access point, enter the PIN
code you wrote down in step 2.
Note: If the access point you are
trying to connect is a Buff alo
AirStation, enter the PIN code in
[Enrollee PIN] and click [OK].
21