Warranty - Buffalo B100 Owner's Installation And Operation Manual

Buffalo Pellet Stoves Limited Warranty
Buffalo Pellet Stoves/Snyder Manufacturing honors a 5-year limited warranty on all steel fabricated parts and a 1-year
warranty on all electrical components. This warranty is non-transferable and will be honored to the original purchaser
effective from the date of purchase (dated sales receipt confirming purchase from an authorized Buffalo Pellet Stove
dealer required).
The following items are not covered under this warranty – burn pot, igniter, heat exchanger tube scraper (and attached
rod), glass, paint, all gaskets and seals, plating on door trim.
This warranty is null and void if your Buffalo Pellet Stove has not been installed, operated, cleaned and maintained in
strict accordance with all guidelines identified within this owner's manual. This warranty does not cover damage,
component failure or reduced performance due to misuse, mishandling, neglect, accident, alteration or willful abuse.
The limited warranty registration card must be completely filled out, signed and returned to Snyder Manufacturing
within 30 days of purchase in order for this warranty to be valid.
All claims under this limited warranty must be made through the dealer from which the stove was purchased. Check
with dealer in advance for any costs to you when arranging a warranty call. Mileage or service charges are not
covered by this warranty. Service charges vary from dealer to dealer. If upon inspection the dealer indicates that a
limited warranty claim is justified and all conditions of this limited warranty have been met, the manufacturer's
responsibilities and liabilities shall be to repair or replace, at the manufacturer's option, the defective part(s). All costs
associated with removal, shipment to and from the dealer or manufacturer, any losses incurred during shipment and
reinstallation, and any other losses incurred due to the appliance being removed and reinstalled, shall be covered by
the appliance owner.
There is no warranty, written or implied, on the performance of this Buffalo Pellet Stove. The manufacturer has no
o
control over the installation, day-to-day operation, cleaning, maintenance or quality of fuel burned in this stove. All
above identified factors are key to the performance of the appliance and are not under the control of the
manufacturer.
This warranty does not cover operational-related problems and damage caused by various issues such as but not
o
limited to
1. Overfiring (caused by excessive feed rate).
2. Damage caused by burning any heating medium other than wood pellets.
3. Environmental conditions that restrict free flow of exhaust gasses from exiting the exhaust system (issues
such as, but not limited to, downdraft or back draft, negative air pressure within the home caused by other
mechanical systems within the home such as furnaces, clothes dryers, etc., improper ventilation, nearby
trees or structures that can inhibit the free exit of exhaust gasses).
In order for this warranty to be valid, the appliance must be installed by a qualified installer (trained pellet stove
o
technician).
This warranty is null and void if:
o
1. Appliance has been operated in an environment contaminated by Chlorine, fluorine or other damaging
chemicals.
2. Appliance has been subjected to submersion in water or prolonged exposure to dampness or high humidity
conditions.
This warranty does not cover damage, component failure or reduced performance due to misuse, mishandling,
o
neglect, accident, improper installation, alteration or willful abuse.
Buffalo Pellet Stoves and Snyder Manufacturing is free of liability for any damages caused by this heating
o
appliance. Incidental of consequential damages are not covered by this warranty.
This warranty is null and void if the appliance's serial number has been removed or if it is found that the serial
o
number has been changed with that of another identical appliance.
This warranty is not valid for appliances used for commercial use.
o
This warranty is not valid if the appliance has not been purchased from an authorized Buffalo Pellet Stove dealer.
o
There is no warranty on damage caused by corrosion.
o
Conditions and Exclusions
Page 36 of 37