Battery-Replacement Procedure - Belkin BU3DC000-12V User Manual

Battery-Replacement Procedure

The RG Battery Backup is designed with an easy-access battery door.
Replacement of the battery requires removing the battery door on the rear of
the device.
No tools are needed.
STEP 1:
Turn off power switch. Disconnect the RG Battery
Backup from power and any connected devices.
Remove the battery door on the rear of the RG Battery
Backup by pressing the tab on the top of the battery
door and pulling outward.
STEP 2:
Remove the battery from enclosure; remove the wire
connections from the battery.
STEP 3
Connect the new battery (black-to-black, red-to-red);
place the battery into enclosure.
WARNING: Carefully connect the wires to the correct
terminals. The red (+) wire is labeled with a tag. The
replacement battery will have color-coded terminals
(red = +, black = -). Do not misconnect the wires.
STEP 4:
Securely reconnect battery door.
10