Sears 721.21195000 Basic Field Manual page 8

4.7 Belt Changing and Brush Cleaning
(ONLY MODEL 721.21295000, 20.21325)
• Disconnect cleaner from electrical outlet. Check and
remove hair, string and lint build-up frequently in the
Power-Mate® brush and brush support areas. If build-up
becomes excessive, disconnect Power-Mate® from
Telescopic wand.
TO REMOVE BELT
1) Turn power-Mate® upside down.
2) Unscrew the for Power-Mate® cover screws.
3) Turn Power-Mate® rear side up and tilt cover forward
from back until front snaps free.
4) Carefully insert and lift screwdriver at each brush support
to free brush from base.
4) Remove worn belt.
Wheel
6) Slide brush supports off to check and clean brush
support areas. See BRUSH ASSEMBLY for picture of
complete brush assembly.
- 8 -
MODEL 721.21195000
Brush Support
Base
721.21295000
20.21125
20.21325