Disassembly Instructions; Mechanical Parts; Bucket And Air Filter; Front Grille - Goldstar DH2510A Service Manual

3. DISASSEMBLY INSTRUCTIONS

3.1 MECHANICAL PARTS

3.1.1 BUCKET AND AIR FILTER

1. Disconnect the power supply.
2. Turn the Humidity Control off.
3. Remove the bucket (See Figure 5)
4. Flex the filter at the lower right corner and take it
off. (See Figure 5)

3.1.2 FRONT GRILLE

1. Remove 2 screws which fasten the front grille.
2. By pushing the both sides of front grille, pull the
front grille forward and upward. (See Figure 6)

3.1.3. CONTROL BOX ASSY AND CABINET

1. Remove the Bucket, the Air filter and Front grille
according to the procedure above.
2. Remove 3 screws that fasten Control box
assy.(See Figure 7)
3. Remove 9 screws on all sides of the cabinet.
4. Lift the Cabinet from the base.
5. Unhook control box assy from two up and lower
hooks on the Housing assy like Figure 8.
Push
Figure 7
—9—
Figure 5
Push
Figure 6
Figure 8
2
1