Advanced Bios Features - Acer Aspire SA85 Service Manual

Advanced BIOS Features

The following screen shows the Advanced BIOS Features:
Silent Boot
Configuration Table
CPU Feature
Hard Disk Boot Priority
CPU L1 & L2 Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
ATA 66/100 IDE Cable Ms
Typematic Rate Setting
x Typematic Rate (Chars/Se
x Typematic Delay (Msec)
Security Option
APIC Mode
OS Select For DRAM > 64
HDD S.M.A.R.T Capability
Video BIOS Shadow
: Move Enter: Select
F5: Previous Values
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Silent Boot
Configuration Table
CPU Feature
Hard Disk Boot Priority
CPU L1 & L2 Cache
Hyper-Threading
Technology
Quick Power On Self Test
First /Second/Third Boot
Device
Boot Other Device
Chapter 2
Phoenix - AwardBIOS CMOS Setup Utilitye
Advanced BIOS Features
[ Press Enter ]
[ Press Enter ]
+/-/PU/PD: Value
F7: Optimized Defaults
Description
Display Full Screen LOGO during POST
Enable the Configuration Table function
Select to display CPU Feature
Select Hard Disk Boot Device Priority
Uses internal level 1 (L1) and external level 2
(L2) cache memory to improve performance.
Enable the Hyper-Threading function
This parameter speeds up POST by skipping
some items that are normally checked.
The items allow you to set the sequence of boot
device where BIOS attempts to load the disk
operating system.
This parameter allows you to specify the system
boot up search sequence.
[ Enabled ]
[ Disabled ]
[ Enabled ]
[ Enabled ]
[ Floppy]
[ Hard Disk]
[CDROM]
[ Enabled ]
[Disabled]
[Enabled]
[ On ]
[ Fast ]
[ Enabled]
[ Disabled ]
6
250
[Setup]
[ Enabled]
[ Non-OS2]
[Disabled]
[Enabled]
F10:Save ESC: Exit
Enabled
Disabled
Enabled
Disabled
Press [Enter]
Press [Enter]
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Floppy, LS120, Hard Disk, CD-ROM,
ZIP100, USB-FDD, USB-ZIP, LAN,
Disabled (Disable this sequence).
The sequence following the order of
Floppy, HDD and CD-ROM is
recommended.
Enabled
Disabled
Item Help
Menu Level
F1: General Help
Options
29