Kenwood TK-3170 Service Manual page 6

TK-3170/3173
8-3. Zone/Channel Select Mode
■ To enable Zone/Channel select mode
1. Press the [Side2] key when "SELF" is displayed. The
transceiver enters Channel Select Mode. On the left half
of the display, the zone number is displayed. On the right
half of the display, the channel number is displayed.
2. Each press of the [A] key changes the position of the "▼"
indicator between the zone select (left side) and the chan-
nel select (right side).
3. Rotate the selector to set the zone or channel number,
depending on the location or the "▼" indicator.
No. Function
Zone/Channel Setting Mode
Select Channel
Select Zone
Channel Edit
1 RX Frequency
2 RX Signaling
6
REALIGNMENT
Choices
1~128
1~128
Step 5.0kHz
Step 6.25kHz
Step 1MHz
Blank
327.0000~550.0000MHz
OFF
QT 67.0~250.3Hz
(EIA Mode)
QT 67.0~254.1Hz
(0.1Hz Step Mode)
DQT 023~754 Normal
(Standard Table Mode)
DQT 000~777 Normal
(1 Step Mode)
■ Channel edit mode
1. Press the [A] key so that the "▼" indicator is located on
the right side, above the channel number.
2. Rotate the selector select your desired channel number.
3. Press the [C] key to enter Channel Edit Mode.
4. Press the [C] key again to select the setting you wish to
modify.
5. Rotate the selector to select the desired value.
6. Press the [B] key to store the value in memory and ad-
vance to the next setting.
7. Press the [C] key to skip any settings you do not wish to
modify.
8. Press the [S] key to exit. "SELF" appears on the display.
Display
▼ [A] : Zone Selection/Channel Selection change
1 - 1
▼
1 - 1 2 8
▼
1 - 1
▼
1 2 8 - 1
S T P _ _ 5 0 0 Display when an item is selected or when a step
S T P _ _ 6 2 5 is changed (about 0.5 seconds)
S T P _ _ _ 1 M [A] : Step change, Default=6.25kHz
R.– – – – – – – [Side1] : Freq On/Blank switching
R.4 5 0. 0 0 0 0 The rightmost dot indicates
50Hz digit (On=5; Off=0)
– – – – – – – – [Side1] : Off/QT/DQT switching
Q T _ _ 6 7.0 _ [A] : Mode switching
Q T _ 2 5 0.3 _ [Side2] : Normal/Inverse switching
Q T _ _ 6 7.0 ∗
Default=OFF
Q T _ 2 5 4.1 ∗
D Q T 0 2 3 N _
D Q T 7 5 4 N _
D Q T 0 0 0 N ∗
D Q T 7 7 7 N ∗
Remarks