Additional Information; Specifications; Cleaning The Speaker - Pioneer S-IW571L Elite Operating Instructions Manual

Additional Information

Cleaning the speaker

Use a dust brush to wipe off dust and dirt.
Never use furniture wax, cleaners, thinners, benzine,
insecticide sprays or other chemicals on or near the
speakers, since these will corrode the surfaces.

Specifications

Speaker system
S-IW571L
Speaker units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . In-wall type
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-way system
1
Woofer . . . . . 13 cm (5 /
4
CST: Mid/Tweeter
. . . . . . . . . . . . . . . 16 cm (6
1
3.8 cm (1 / in.) Titanium dome/Aluminum cone type
2
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Frequency response . . . . . . . . . . . . . . . . . . . . 33 Hz to 40 kHz
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 dB (2.83 V)
Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . .130 W
Crossover frequency . . . . . . . . . . . . . . . . . . . . 450 Hz/2.0 kHz
External dimensions
. . . . . . . . . . . . . . . . . . 525 (W) mm x 85 (H) mm x 225 (D) mm
11
20 / (W) in. x 3
16
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9 kg/13 lbs
Accessories
Paint mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Grille . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Butyl rubber tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Grille removal tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating instructions (This document)
• Specifications and design subject to modification
without notice.
• CST (Coherent Source Transducer) is a three-
dimensionally-aligned sound source for the tweeter
and midrange, allowing the sound directivity to be
precisely controlled at all frequency.
is a trademark placed on a product with
Pioneer's Phase Control technology. This technology
enables high-grade sound reproduction through each
component by improving overall phase matching.
in.) x 2, Aramid fiber cone type
1
/ in.) Aramid fiber cone type/
2
3 7
/ (H) in. x 8 / (D) in.
8 8
Ω
7
en