Philips BDL4254ET User Manual page 29

BDL4254ET
Frame comp. - Yes
Frame comp. - No
• Enable: Choose to enable or disable the Tiling function. If enabled,
the display will apply the settings in {H monitors}, {V monitors},
{Position}, and {Frame comp.}.
• Switch on delay: Set the power-on delaying time (in seconds). The
default option {Auto} allows a sequential powering-on for each
display by their ID number when multiple displays are connected.
The options are: {Off / Auto / 2, 4, 6, 8, 10, 20, 30, 40, 50}
NOTE: The Tiling function will be disabled when the [ON/OFF]
button for PIP is pressed.
Heat status
This function allows you to check the thermal status of the display at
any time.
Date and time
Adjust the current date and time for the display's internal clock.
Date and time
Year
Month
Day
Hour
Minute
Daylight saving time
Current date time
1. Press [ ] button to enter the submenu.
2013
01
01
20
20
2013 . 01 . 01 20 : 20 : 17
Press [SET] to set clock
2. Press [ ] or [ ] button to toggle between {Year}, {Month}, {Day},
{Hour}, {Minute}, and {Daylight saving time}.
3. Press [ ] or [ ] button to adjust all settings except {Daylight
saving time}.
4. Press [SET] button to enter the {Daylight saving} submenu.
5. Press [ ] or [ ] button to select item, press [
to adjust.
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: We recommend you to set up current date and time in the
{Date and time} menu before using this function.
1. Press [SET] or [ ] button to enter the submenu.
Schedule
Today 2013 . 01 . 01
1
2 On
3 ＿ : ＿
4
5 Every day
6 Wed
7 SAT
2. Press [ ] or [ ] button to select a schedule item (item number 1
~ 7), and then press [ ] button to mark it the item number.
Schedule
Today 2013 . 01 . 01
1
1
2 On
3 ＿ : ＿
4
5 Every day
6 Wed
7 SAT
3. Press [ ] or [ ] button to select the schedule:
Power-on schedule: Press [
1
and minute for the display to turn on.
Power-off schedule: Press [
2
and minute for the display to turn off.
Select or leave an empty "__" for both the hour and minute slot if
you do not want to use this power-on or power-off schedule.
20
] or [
TUE 20 : 19 : 55
Off Input
＿ : ＿
＿
MON TUE
THU FRI
SUN Every week
TUE 20 : 19 : 55
2 3
Off Input
＿ : ＿ ＿
4
MON TUE
THU FRI
SUN Every week
] or [ ] button to set the hour
] or [ ] button to set the hour
] button