7 Troubleshooting & FAQs
7.1 Troubleshooting
This page deals with problems that can be
corrected by a user. If the problem still persists
after you have tried these solutions, contact Philips
customer service representative.
Common Problems
No Picture (Power LED not lit)
the power outlet and into the back of the
monitor.
then press it to the ON position.
No Picture (Power LED is White)
connected to your computer.
pins on the connect side. If yes, repair or
replace the cable.
Screen says
the Quick Set-Up Guide).
pins.
AUTO button doesn't function
satisfactory, you can do manual adjustments
via the OSD menu.
Note
DVI-Digital mode as it is not necessary.
Visible signs of smoke or sparks
source immediately for safety
representative immediately.
Imaging Problems
Image is not centered
Image vibrates on the screen
connected to the graphics board or PC.
Vertical flicker appears
42