Programm Option Button; Select The Prewash Option - AEG Electrolux LAVAMAT 60640 User Manual

14 Use
Rinse Hold: by selecting this option the water of the last rinse is not emptied out
to prevent the fabrics from creasing. When the programme has finished the display
shows a 0 flashing, the pilot lights Door
and the door is blocked to indicate that the water must be emptied out.
To empty the water out:
turn the programme selector dial to
●
select the Drain or Spin programme
●
reduce the spin speed if needed, by means of the relevant button
●
depress Start/Pause button
●
when the programme has finished the display shows a
●
lights Door
Programme option button
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated yellow pilot light of the
Start/Pause button flashes for 3 times and the Err message appears on the
display for some seconds.
Important!
For the compatibility among the washing programmes and the options see
chapter Washing Porgrammes.

Select the Prewash option

Select this option if you wish your laundry to be
prewashed at 30°C before the main wash. The
prewash ends with a short spin in programmes for
cotton and synthetic fabrics, whereas in the
programmes for delicate fabrics the water is only
drained.
The relevant light will light up.
goes off and the door can be opened.
goes on, the Start/Pause light is off
O
0
flashing. The pilot