Organizing Your Cables - Dell U2711 User Manual

If your monitor displays an image, installation is complete. If it does not display an image, see
NOTE: If you are using DisplayPort cable as the input, change the input source through the OSD menu's
Use the cable management slot on the monitor stand to organize the cables.
l

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (See
neatly organize all cables as shown above.
Attaching the Soundbar (Optional)
1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
NOTICE: Do not use with any device other than Dell Soundbar
NOTE: Soundbar Power Connector +12V DC output is for optional Soundbar only.
Back to Contents Page
Solving Problems.
Connecting Your Monitor for cable attachment,) use the cable management slot to
Input source select option to DisplayPort.