Amplifier Features; What Is In The Set - Laboga AD 5300 User Manual

- power: 50W,
- tubes used: 4 × EL84, 2 × 12AX7,
- speaker (combo only): Celestion G12T-75,
- two channels: clean and distorted,
- volume control: clean channel, gain and volume controls – distorted channel,
- two separately gain knobs controlled with a footswitch: Gain1 and Gain2,
- the same tone control for both channels,
- footswitch: changes channels and switches between Gain 1 and Gain 2,
- channel switching on relays,
- separate Bright switches for both channels,
- series effects loop,
- speaker outputs: 4 Ω, 8 Ω, 16 Ω.
- Footswitch Channel / Gain,
- Cable connecting footswitch and amplifier ("stereo"),
- Power supply cable,
- Owner's manual,
- Warranty.

AMPLIFIER FEATURES

WHAT IS IN THE SET

Page 5