Hitachi IP5000 WiFi SIP Phone 1 Important Notes SIP 3 SIP 3 Party validation web site 2 Vendor Documentation 3 Validated Firmware Version 4 Install 5 Configuration Methods: Manipulation of the supplied .ini file, then uploading it via TFTP through the menu system.
Make sure the current version of the firmware is installed. See Validated Firmware section above. If the IP5000 is not running the validated version of firmware, refer to section 3.5 of the IP5000 Administrator’s Guide for instructions on upgrading the firmware.
Changes can be made via the web interface or the .ini file can be modified and re- downloaded to the IP5000, noting the issues above regarding environments with multiple units. Examples of the more significant portions of the web interface. This is not a comprehensive web interface tutorial but intended to ensure that all settings required for compatibility with xIC are selected.
Local Port (5000~40000) T1 (0~65535) T2 (0~65535) T4 (0~65535) Timer B (0:Disable, 500~65535) Timer F (0:Disable, 500~65535) Use User Agent User Agent Name Use Version On User Agent Use Vendor ID On User Agent Use MAC On User Agent Max Forwards Retry Hold On 491 Caller ID Mode ICT Transaction Max Count (0~100)
Request Timeout (0:Disable, 500~32000) Use Fixed Primary Server Transfer Use Transfer Target Hold Use Consultation Transfer Use Blind Transfer Use 100 NOTIFY Use Attended Transfer On Incomming Call Use Contact For Refer To System Setup/User Account Displayname Phone Number User ID User Password URL Scheme System Setup/Server Settings...