Accessories; Standard Accessories; Optional Accessories - Hitachi C 7BMR Instruction And Safety Manual

English
7. Service parts list
CAUTION:
Repair, modification and inspection of Hitachi
Power Tools must be carried out by an Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with
the tool to the Hitachi Authorized Service Center
when requesting repair or other maintenance. In
the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
WARNING: Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury or
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Saw Blade .............................................................. 1
External Diam Hole Diam.
7-1/4" (185mm) 5/8" (15.9mm)
(2) Wrench (Code No. 940543) .................................. 1
OPTIONAL ACCESSORIES.......sold
separately
(1) Guide (Code No. 302691) (Includes (2) and (3).)
(2) Wing Bolt (B) (Code No. 302697)
(3) Lock Spring (Code No. 947859)
NOTE:
Specifications are subject to change without any
obligation on the part of the HITACHI.
14

ACCESSORIES

mechanical damage.
Code No.
327761
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/
or design) may be changed without prior notice.