TRENDnet TK-401R Quick Installation Manual page 8

Hot Key Commands
A keyboard hot key command consists of three keystrokes:
Hot Key command = Scroll Lock + Scroll Lock + Command key(s)
After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot key mode.
To select a specific PC port:
For TK-401R
Y = Port number 1-4
For example, to Select Port 1 on the KVM switch you hit the following key sequence
For TK-801R/TK-1601R
Y Z = Port number 01-08 (TK-801R) or Port number 01-16 (TK-160R)
For example, to select Port 1 or Port 10 on the KVM Switch, you hit the following key
sequence
Select Port 1 =
Select Port 10 =
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
Scroll Lock + Scroll Lock +
Scroll Lock Scroll Lock +
+
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock Scroll Lock +
+
5
Y
1
Y + Z
0 + 1
1 + 0