Table of Contents
Advertisement
defined shares. Of course, if you checked "Create Private Folder" in step (9), then
read/write access has automatically been provided to this user's private folder.
Though the initial factory setting provides for three default shares (admin, guest-
share, and public), only "public" is available for selection for access to new user
accounts.
When done with this form, press Complete.
Add New Group
12. Next you may optionally setup a new group. If you do not want to set up a group at
this time, you may jump ahead to Step 15.
Begin group setup by selecting the Quick Setup / Add Group button.
Fill in the initial screen with your group's name. The group name must be lower-case
and may be a maximum of 20 alphanumeric characters, without spaces. The group
name must begin with an alphabetic character. Press Next to continue.
13. The next screen allows you to assign any of the current users to your new group.
When done with this form, press Next to continue.
14. The next screen allows you to assign share access privileges for the new group.
Each of the existing shares may be setup for no access, read-only access, or full
15
Advertisement
Table of Contents
