Verbatim Gigabit Ethernet Hard Drive User Manual page 17

Press Next to continue.
7. The next screen allows you to manually set the date and time, or to use an available
Network Time Protocol (NTP) server. It is useful to set the correct date and time
because time stamps are used in the various status logs that are described later in
this manual. After filling in your selections, press Next.
8. The settings made in the previous steps are summarized on this screen for your
review. You may either go back to edit your settings, or press Complete to save the
settings as shown.
Add New User Account
9. Next setup a user account by selecting the Quick Setup / Add User button.
Fill in the initial screen with a User Name and Password. It is recommended that
these fields match the User Name and Password that this user normally enters when
logging into Windows or to Mac OS X. The User Name must be lower-case and may
13