Table of Contents
Advertisement
Appendix
Specifications
AITe130V-UL
■ Performance
Storage Capacity
Data Transfer Rate (TAPE)
Burst Data Transfer Rate
Bit Error Rate
Load Time
Unload Time
Rewind Time
■ Operating Environment
Operating
Non-operating
■ Power Supply & Miscellaneous
Rated Power Supply
Case Dimensions
Mass
Equipment
50 GB uncompressed (with 230 m AIT-2 data cartridge)
130 GB compressed (with 230 m AIT-2 data cartridge
6 MB/s uncompressed (with 230 m AIT-2 data cartridge)
480 Mbps maximum (USB)
400 Mbps maximum (i.LINK)
less than 10
average of 14 seconds
average of 20 seconds
average of 105 seconds
(with 230 m AIT-2 data cartridge)
Temperature: 10°C to 35°C (∆T<10˚C/h)
Humidity:
Temperature: –40°C to 70°C (∆T<20˚C/h)
Humidity:
100 to 240 V AC, 50/60 Hz, 1.2 A
198 × 64.5 × 246 mm (W × H × D) (excluding projections)
2.4 kg
Quick start guide
AIT-2 data cartridge (SDX2-50C)
Operating instructions CD-ROM
1Safe™ CD-ROM
USB 2.0 cable
i.LINK cables
(6-pin to 6-pin, 6-pin to 4-pin, 1 each)
Power cable
Warranty card
Safety regulations
Specifications may be subject to change, in the interest of technological
improvement, without notice or obligation.
*1
Assuming a 2.6:1 hardware compression ratio.
The actual degree of data compression during recording depends on the system environment
and type of data.
*2
No retries.
-17
*2
*2
*2
(50 °F to 95°F (∆T<18˚F/h)
30 to 80% (non-condensing)
Maximum wet bulb temperature: 26°C (78.8˚F)
(–40 °F to 158°F (∆T<36˚F/h)
10 to 90% (∆RH<30%/h)
Maximum wet bulb temperature: 45°C (113˚F)
*1
)
1
1
1
1
1
2
1
1
1
27
Appendix
Advertisement
Table of Contents
