Table of Contents
Advertisement
Drive Operation
Loading a Tape
Insert a cassette into the slot on the front panel with the arrow on the
cassette pointing towards the drive. As the cassette is inserted, the drive
takes it and automatically loads it into drive mechanism.
Unloading a Tape
The cassette can be removed from the AITi130-A/AITi90-A either in
response to a ATAPI Packet Unload Command, or by pressing the eject
bottom.
By pressing Eject button, the tape goes to BOT, the drive unthreads it, and
ejects the cassette from the slot.
Write-protecting a Tape
Cassettes can be write-protected by sliding the tab on the back of the
cassette. In this state, data can be read from the tape but not written onto it.
AIT-1 AIT-2
Using a Cleaning Cassette
In case of AITi130-A/AITi90-A, a cleaning function is built into the drive
and hence the use of a c leaning cartridge is not needed. If however the
drive experiences excessive errors, the use of a cleaning cartridge is
recommended.
Using your fingernail, push the switch in the
direction of the arrow to protect the tape from
writing or accidental erasure.
Return the switch to its original position to
re-enable writing.
13
Advertisement
Table of Contents
