Replacing The Air Filter - Hitachi CP-X870W User Manual

Hitachi user's manual liquid crystal projector cp-x870w

Hide thumbs Also See for CP-X870W:

Table of Contents

THE AIR FILTER (continued)

Replacing the air filter

If the soiling will not come off the air filter, or it becomes damaged, then it needs to be

replaced. Please contact your local dealer, after confirming the model of your

separately sold replacement air filter.

Replacement air filter model: NJ07081

Turn off the projector, and unplug the power cord. Prepare a

new air filter (one specified for your projector)

Remove the air filter cover and air filter

Insert the new filter, and replace the

filter cover

Turn on the projector power, and using the menu, reset the

filter timer

• To reset the filter timer, from the OPTION menu, select FILTER TIME.

ATTENTION

the unit. Please carefully read "Safety Instructions", in order to care for your projector correctly.

• Do not use with air filter cover removed.

• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause

malfunction. The power is automatically turned off in order to prevent the unit from overheating

internally.

• Make sure to turn off the power and unplug the power cord before caring for

Table of Contents

Cp-x870