Package Contents
• Home Wireless-G USB Adaptor
• USB Cable
• Setup CD-ROM with User Guide
• Quick Installation
2
4 ,
GHz
Home
Wireless-G
802.11g
USB Adaptor
Wireless
HU200
Model No.
Set up the Home Wireless-G USB
1
Adaptor
A
Insert the Setup Wizard CD-
ROM into your CD-ROM drive.
The Setup Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click the
Start button and choose Run.
In the field that appears, enter
D:\setup.exe (if "D" is the letter
of your CD-ROM drive).
B
To install the Adaptor, click the
Install button on the Welcome
screen.
C
After reading the License
Agreement, click Next.
D
Choose a wireless network
mode. Click the Infrastructure
Mode radio button if you want
to connect to a wireless router
or access point. Click the Ad-
Hoc Mode radio button if you
want to connect directly to
another wireless device without
using a wireless router or
access point.
In the SSID field, enter the SSID
or name for your wireless
network. The SSID must be
identical for all devices in the
network. Click Next.
Quick Installation
E
If you chose Infrastructure
Mode, go to Step F now.
If you chose Ad-Hoc Mode,
select the channel that your
network uses. For the Network
Mode, select Mixed Mode to
allow both Wireless-G and
Wireless-B computers on the
network, or select G-Only
Mode to allow only Wireless-G
computers. Then click Next.
B
F
If your network doesn't use any
security method, select
Disabled and click Next.
Proceed to Step H.
Select the security method you
want to use: WEP or PSK. (WEP
stands for Wired Equivalent
Privacy, and PSK stands for Pre-
Shared Key.) Then click Next
and proceed to Step G.
C
NOTE:
If your network is using WPA-
Personal or WPA-PSK security, then
select PSK.
D
E
F