Using REGZA-LINK
34
®
(continued)
®
REGZA-LINK
input source selection
®
If a REGZA-LINK
device with HDMI switching capability (e.g. Audio Receiver) is connected to
the HDMI input, you can select another REGZA-LINK
HDMI device using INPUT
panel.
VOLUME and MUTE controls of Audio Receiver
With your TV's remote control, you can adjust or mute the sound volume of a REGZA-LINK
compatible Audio Receiver.
•
adjusts the volume level.
•
turns off the sound.
To use this function
1
Set Speaker Preference to Audio Receiver in the
REGZA-LINK Setup menu.
2
Confirm that a connected REGZA-LINK
the Audio Receiver input source.
Note:
• You can also use this function when the audio receiver is connected to the TV's DIGITAL
AUDIO OUT terminal (not HDMI connection). In this case, select a digital audio input mode
on the Audio Receiver.
• These functions depend on the device connected.
®
device that is connected to the master
on the remote control or INPUT/ENTER
®
device (such as a DVD player, etc.) is selected for
on the TV control
REGZA-LINK Setup
Enable REGZA-LINK
On
TV Auto Input Switch
On
TV Auto Power On
Off
Device Auto Standby
On
: Adjust
®