Table of Contents
Advertisement
TV SCAN FUNCTION
The TV Scan function on this TV provides two modes, mode 3 and mode 12. To use this function allows you to
enjoy the programs easily and comfortably.
While in a normal picture mode, press the TV SCAN button to enter mode 3 or mode 12.
Mode 3
Follow the steps on page 20 to enter the Function menu and
then select the TV Scan option as shown on the right.
Press the
cursor buttons to set the TV Scan option
to mode 3, then quit the menu.
In normal TV mode, press the TV SCAN button to enter
mode 3 (4-Picture mode) as shown below.
The picture A will display the current moving picture.
The speakers and the headphone jack output the sound
from the picture A. The monitor out terminals output
audio and video signals from the picture A.
The B1, B2, B3 will display all the unset skipping
programs starting from program No.0 in sequence every
several seconds.
When entering mode 3, you can select the picture A by
pressing the program up/down buttons
buttons. As to B group (B1, B2, B3) pictures, you can
press the
P+
P- buttons to select one of the pictures
among the B1, B2, B3 picture. The color of program No.
in the selected picture will turn from white to green. Then
press the ENTER button, the picture selected in B group
will be switched to the picture A.
In this mode, press the TV SCAN or the RETURN button to quit.
In this mode, you can enter the Audio menu to perform the adjustment. When entering other menus such as the
Picture menu, it will quit the 4-Picture mode.
In this mode, the A/B, SWAP and POSITION buttons are invalid.
Note: Not all input signal formats are valid for mode 3. Even if the signal may be displayed in TV mode before
entering mode 3, it may not be displayed while in mode 3. In such case, the characters !Invalid Signal will
appear in the picture A, or the
or number
symbol will appear in the picture B. This is normal.
33
A
B1
B2
B3
Advertisement
Table of Contents
