Table of Contents
Advertisement
ON-SCREEN DISPLAY MENU PICTURE MENU
Picture Menu
Picture menu allows you to adjust various picture settings such as brightness, color, contrast and sharpness,
including the settings of color temperature, dynamic contrast, etc. Follow the steps below.
1
Press the MENU button to display menu.
Press the
cursor buttons to select the Picture option as
shown on the right.
2
Press the ENTER button to display the Picture menu as
shown on the right.
This is the first page in the Picture menu, providing 4
different picture modes (Dynamic, Natural, Theater,
Favorite). Press the
suggest that you try every item to obtain the desired picture
effect.
To set the picture effect you desired, press the
buttons to select the adjustment item, and then press the
cursor buttons to adjust.
Note
1 Press the PICTURE button on the remote control unit, you can switch among the above four picture modes
easily.
2 Only when receiving NTSC signals or Y, P
3 Only when receiving PAL system, the PAL Comb Filter option is set to On or Off; when receiving other
systems, the comb filter is automatically set.
4 If the Reset option is selected and confirmed by pressing the ENTER button, the current setting on the
menu will return to the factory setting.
5 For AV1 AV5 inputs, different picture modes can be set individually.
cursor buttons to select. We
/C
B
cursor
, P
/C
inputs, the Tint option can be adjusted.
B
R
R
16
Advertisement
Table of Contents
