Hitachi 57T600 Operating Manual page 63

SETUP
Set The Channels
For ANT A and ANT B, select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you
have cable TV.
Setup
Menu Preference
Set The Clock
Set The Channels
Set The Inputs
Set Event Timer
Set Closed Captions
Set Monitor Out
Upgrades
About Your TV
Move Select
SEL
Setup
Set The Channels
Ant A (NTSC)
Ant B (NTSC)
Ant C (DTV)
Move Select
SEL
Setup
Set The Channels
Ant A (NTSC)
Source
Antenna
Auto Channel Scan
Move
SEL
NOTE: If certain CATV channel's picture are poor or unable to be viewed in Cable (1) mode, select Cable (2).
Choose ANT C for digital signals. Select Antenna if you are using an indoor or outdoor antenna to receive your digital signals or select
cable if you have digital cable.
Setup
Set The Channels
Ant A (NTSC)
Ant B (NTSC)
Ant C (DTV)
Move Return
SEL
Use THUMB STICK , to highlight the correct signal source.
Press down on THUMB STICK to select highlighted signal source.
Press EXIT to quit MENU or select ANT A, ANT B or ANT C to return to previous menu.
Cable(1) Cable(2)
Start
Select
Setup
Set The Channels
Ant A (NTSC)
Ant B (NTSC)
THUMB
STICK
Ant C (DTV)
Move Return
SELECT SEL
THUMB
STICK
Setup
Set The Channels
Ant A (NTSC)
Source
THUMB
Antenna
STICK
Auto Channel Scan
SELECT
Return
Move
SEL
THUMB
STICK
Setup
Set The Channels
Ant C (DTV)
THUMB
STICK
Source
Antenna Cable
SELECT
Auto Channel Scan
Move Return
SEL
63
Cable(1) Cable(2)
Start
Signal Meter
Start