Table of Contents
Advertisement
SETUP
This function allows you to automatically change tint and color coordinates for DTV programs.
Set The Color
HDTV - High Definition Television - Use for High Vision Signal Y-P
System
SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player) Y-C
NOTES: 1. If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be
abnormal.
2. You must be tuned to VIDEO: 1 or 2 inputs and have a component hooked up to the Y-P B P R input jacks to access
this color system.
3. All component color type settings will affect only color component input you are currently viewing. If you are using
both sets of component input jacks, be sure to set the color system feature for both inputs.
Set Virtual HD
Use this feature to select between 1080i and 540p (see page 32).
Set Black Side
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Panel
Standard mode. The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE.
NOTE:
To maximize operating life of the TV's picture tubes when watching 4:3 signal, Black Side Panel is cancelled at Power
OFF. It is recommended to watch 4:3 signal with gray side bar.
69
P
from HDTV Set-Top Box.
B
R
C
.
B
R
Advertisement
Table of Contents
