Table of Contents
Advertisement
100
If Something Goes Wrong
Power and the batteries
Power and the batteries
Your device receives its power through the USB/AC adaptor and
USB/power cable or from the system battery. Power problems are
interrelated. For example, a faulty USB/AC adaptor or USB/power
cable will neither power the device nor recharge the batteries.
Here are some typical problems and how to solve them:
The USB/AC adaptor and USB/power cable work correctly,
but the battery will not charge.
The battery does not charge while the device is consuming full
power. Try turning off the device.
The battery may be too hot or too cold to charge properly. If you
think this is the probable cause, let the battery reach room
temperature and try again.
The device does not power on.
Let the battery discharge completely, then try charging it again.
Check the power options. For more information, see
battery life" on page
drive more? Is the display power set to turn off automatically? Was
the battery fully charged to begin with? All these conditions affect
how long the charge lasts.
If the device still does not power on, contact your service provider
immediately.
After a period of time, the battery will lose its ability to perform at
maximum capacity and will need to be replaced. This is normal for
all batteries.
For more information on maintaining battery power, see
the battery" on page
Display problems
Here are some typical display problems and their solutions:
The screen does not look correct.
You can change the display settings by touching the Settings (
icon on the Home screen. For more information, see
settings" on page
28. Is your software using the internal storage
27.
67.
"Optimizing
"Charging
)
"Display
Advertisement
Table of Contents
