Chapter 1 Introducing the ZyWALL
Use a #2 Phillips screwdriver to install the screws.
Note: Failure to use the proper screws may damage the unit.
1.2.1 Rack-Mounted Installation Procedure
Align one bracket with the holes on one side of the ZyWALL and secure it with the
1
included bracket screws (smaller than the rack-mounting screws).
Attach the other bracket in a similar fashion.
2
Figure 1 Attaching Mounting Brackets and Screws
After attaching both mounting brackets, position the ZyWALL in the rack by lining
3
up the holes in the brackets with the appropriate holes on the rack. Secure the
ZyWALL to the rack with the rack-mounting screws.
Figure 2 Rack Mounting
34
ZyWALL USG 300 User's Guide