Remote Control Battery Installation And Replacement - Hitachi 51F510 Operating Manual

Check to make sure you have the following accessories before disposing of the packing material.
1. Remote Control Unit CLU-4341UG2 (Part No. HL02071).
2. Two "AA" size, 1.5V batteries (For Remote Control Unit).

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1. Open the battery cover of the remote control by pushing down and sliding the back cover off.
2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the springs
and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
REMOTE CONTROL
1.
BOTTOM VIEW
(Remote Control)
Lift up on tab to
remove back cover.
4
BATTERIES
("AA")
2.
ACCESSORIES