Applications And Gaming > Service; Administration > Management - Cisco Linksys WAG310G User Manual

Wireless-g adsl2+ gateway with voip
Hide thumbs Also See for Linksys WAG310G:
Table of Contents

Advertisement

Chapter 3
On the original QoS screen, click Save Settings to apply
your changes, or click Cancel Changes to cancel your
changes.
Applications and Gaming > Service
The Service screen allows you to add services.
Applications and Gaming > Service
Service/Application
Service Table
The services are displayed with the following information:
Service Name, Protocol, Ports/Types, and Action. To delete
a user-defined service, click Delete. (Default services
cannot be deleted.)
To view additional services, click Extended View. To return
to the Basic View, click Basic View.
Service Entry
Service Name
Enter a name for the new service.
Protocol
Select the appropriate protocol: TCP(6),
UDP(17), ICMP, ESP(50), AH(51), GRE(47), IGMP(2),
PIM-DM(103), or IPCOMP(108).
Ports
Enter the starting and ending port numbers.
ICMP Type
Enter the appropriate number, 1-255, which is
valid only for ICMP.
IGMP Type
Enter the appropriate number, 1-255, which
is valid only for IGMP.
Click Add Service to add a new service, or click Cancel
Changes to cancel your changes.
Wireless-G ADSL2+ Gateway with VoIP
Advanced Configuration
Administration > Management
The Administration > Management screen allows the
network's administrator to manage specific Gateway
functions for access and security.
Administration > Management
Gateway Access
Local Gateway Access
To ensure the Gateway's security, you will be asked for your
username and password when you access the Gateway's
web-based utility. The default username and password
are admin.
Gateway
Username
Enter
Username, admin.
Gateway Password
Linksys recommends that you
change the default Gateway Password, admin, to one of
your choice.
Re-enter to Confirm
Enter the Gateway Password again
to confirm.
Remote Gateway Access
Remote Management
To permit remote access of the
Gateway, from outside the local network, select Enabled.
Otherwise, keep the default, Disabled.
Management Port
Enter the port number that will be
open to outside access.
Management Protocol
Select the appropriate protocol,
HTTP or HTTPS.
the
default
Gateway
35

Advertisement

Table of Contents
loading

Table of Contents