Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶
U-Key [Disabled]
Enables or disables U-Key as user's password to access the system.
▶
Make U-Key at
Makes a key at the USB flash drive to prevent other people from accessing the
system. Only the user who has the key with the flash drive can access the system.
▶
Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶
TPM SUPPORT [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
▶
Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
▶
Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to
[Enabled] later. [Options: Disabled, Enabled, Reset]
Save & Exit
▶
Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes
and exit BIOS setup.
▶
Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶
Save Changes
This item is used to save current changes.
▶
Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶
Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
▶
Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
be a boot device to start booting.
3-15
3-15
BIOS Setup
BIOS Setup