JFP1, JFP2: System Panel Connectors
These connectors connect to the front panel switches and LEDs. The JFP1 connector
is compliant with the Intel
installing the front panel connectors, please use the optional M-Connector to simplify
installation. Plug all the wires from the computer case into the M-Connector and then
plug the M-Connector into the motherboard.
Video Demonstration
Watch the video to learn how to Install front panel connectors.
http://youtu.be/DPELIdVNZUI
Important
•
On the connectors coming from the case, pins marked by small triangles are
positive wires. Please use the diagrams above and the writing on the mConnectors
to determine correct connector orientation and placement.
•
The majority of the computer case's front panel connectors will primarily be plugged
into JFP1.
Getting Started
Front Panel I/O Connectivity Design Guide. When
®
JFP2
JFP1
1-26