Remote Control Battery Installation And Replacement - Hitachi 50C10 Operating Manual

Check to make sure you have the following accessories before disposing of the packing material.
OPTIONAL LCD REAR PTV STAND (NOT INCLUDED, ORDER SEPARATELY)
PART NAME
50" LCD Rear PTV Stand - SP50W
50" LCD Rear PTV Stand - SP50WS
CUSTOM HITACHI TELEVISION STAND
Excellent for VCR and video tape storage.
CAUTION: 1. This SP50W and SP50WS LCD stand for use only with Hitachi 50C10 and 50C10E. Use with other
apparatus is capable of resulting in instability causing possible injury.
1. Remote Control Unit CLU-4329UG (Part No. HL01839).
2. Two "AA" size, 1.5V batteries (For Remote Control Unit).

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off.
2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the springs
and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
REMOTE CONTROL
POWER
TV CBL/SAT DVD/VCR
SWAP PIP MODE
PIP FREEZE
SURF
MENU
DAY/NIGHT
SELECT
LAST CH
MUTE
EXIT
VOL CH
1 2 3
4 5 6
7 8 9
0
ANT INFO
VID1 VID2 VID3 VID4
REC ASPECT SLEEP
VID5
CLU-4329UG
PART NO.
H520445
QJ01601
BATTERIES
("AA")
1.
4
ACCESSORIES
2.
BOTTOM VIEW
(Remote Control)
Lift up on tab to
remove back cover.