Hitachi 50C10 Operating Manual page 37

VIDEO
Color Decoding
Video
Color Management
Color Decoding
Auto Color
Noise Reduction
Auto Movie Mode
Move SEL Select
Use CURSOR button or
Press the SELECT button to select from 4 menu items.
Press CURSOR buttons ,
Use CURSOR button or
Press EXIT to quit or select COLOR DECODING to return to previous menu.
COLOR DECODING settings are independently stored in each of the 4 Color Temperature settings.
NOTE:
The AUTO COLOR function automatically monitors and adjusts the color to maintain constant color levels
Auto Color
even after a program or channel changes. It also maintains natural flesh tones while preserving fidelity of
background colors.
When using Component or DVI-HDTV input, Auto Color will not be available (grayed out).
NOTE:
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without
Noise Reduction
degrading picture quality. Set NOISE REDUCTION to Off if the TV experiences picture blocking.
The AUTO MOVIE MODE function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE.
Auto Movie Mode
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields
like video. When film is transferred to video for television viewing, the disparity between the two frame rates
must be reconciled. This involves a process known as 3:2 pulldown.
When AUTO MOVIE MODE is turned On from the Video menu, your Hitachi LCD TV will activate the cir-
cuitry for this special feature to improve video performance when watching film based sources.
1. When using Progressive Scan Component or DVI-HDTV input (Ex. 480p, 720p), Auto Movie Mode will not be
NOTE:
available (grayed out).
2. All Video settings are independent of each other based on it's input (Ant A/B, Inputs 1~5).
Use this function to adjust the percentage of Red, Green and Color according to the user's preference.
Use Tint to adjust flesh tones so they appear natural.
ANT A/B
Off
Low
Off
to highlight function.
, and to highlight and adjust Red, Green, Color and Tint.
to highlight and select "Reset" to return all settings to default.
Video
Color Decoding
RGB R
Red
SELECT
Green
Color
or
Tint
Reset
Move Return
SEL
37
G B
50%
50%
50%