Figure 7-14: Configuration - Appletalk - Linksys WPS54GU2 User Manual

Wireless-G PrintServer for USB 2.0
Apple Talk (Figure 7-14)
• Zone Name. Typically only Macintoshes use AppleTalk, although other platforms can use it if they have
the necessary, third-party software installed. Enter the Zone Name in the field provided.
• Port Setting. Select the port number from the drop-down menu. The Printer Type can be obtained from
the manufacturer of the printer. Enter the type of printer in the Printer Type field. For each printer
connected to the PrintServer, you will choose the Communications Protocol that allows the devices on the
network to communicate. Select the type of Communication Protocol you will use, ASCII or Binary for
each printer, according to the recommendation of the printer's manufacturer. For more information, refer
to the printer's documentation.
Click the Get Defaults button if you want to cancel your changes and use the default settings.
When finished making your changes on this tab, click the OK button to save these changes, or click the
Cancel button to undo your changes. For more information, click the Help button.
Chapter 7: Bi-Admin Management
The Bi-Admin Management Utility

Figure 7-14: Configuration - AppleTalk

35